DH Instruments 401460 설치 지침

{카테고리_이름} DH Instruments 401460에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DH Instruments 401460 1 페이지. Interconnections kit

INTERCONNECTIONS KIT, P/N 401460

•

401459

•

101988-Z

•

100319

•

102116

•

102117

•

102184

TO CONNECT TO THE PPC

Screw the 1/8 in. swage x 1/8 in. NPT male adaptor into the PPC test port using teflon tape as a seal.

Install reducer into quick connector on stand.

Position quick connector on stand on bench or other stable surface. (Mounting is optional, holes are

provided.)

To connect PPC test port to the quick connect stand cut 1/8 in. SS tubing to desired length, bend as

needed including 90° angle under reducer.

1/8 in. SS tubing can be bent by hand to desired shape but use caution not to kink the tube.

Swage the 1/8 in. SS tube to adaptor on PPC and to reducer on quick connect stand.

PPC is a trademark, registered and otherwise, of DH Instruments, a Fluke Company

Document 560021a

DH Instruments, a Fluke Company

4765 East Beautiful Lane

Phoenix AZ 85044-5318

USA

PPC Test Port Connections Kit

Quick connector on stand

1/8 in. stainless steel tubing (75 cm)

1/8 in. swage x 1/8 in. NPT male adaptor

Quick connector stem, 1/8 in. NPTF

Quick connector stem, 1/4 in. NPTF

Reducer, 1/4 in. swage x 1/8 in. swage

Installation Instructions

071023

Tel 602.431.9100

Fax 602.431.9559