DH Instruments 401460 Kurulum Talimatları

Kablolar ve konektörler DH Instruments 401460 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. DH Instruments 401460 1 sayfaları. Interconnections kit

Sayfayı Yazdır
INTERCONNECTIONS KIT, P/N 401460
•
1
401459
•
1
101988-Z
•
1
100319
•
1
102116
•
1
102117
•
1
102184
TO CONNECT TO THE PPC
Screw the 1/8 in. swage x 1/8 in. NPT male adaptor into the PPC test port using teflon tape as a seal.
Install reducer into quick connector on stand.
Position quick connector on stand on bench or other stable surface. (Mounting is optional, holes are
provided.)
To connect PPC test port to the quick connect stand cut 1/8 in. SS tubing to desired length, bend as
needed including 90° angle under reducer.
1/8 in. SS tubing can be bent by hand to desired shape but use caution not to kink the tube.
Swage the 1/8 in. SS tube to adaptor on PPC and to reducer on quick connect stand.
PPC is a trademark, registered and otherwise, of DH Instruments, a Fluke Company
Document 560021a
DH Instruments, a Fluke Company
4765 East Beautiful Lane
Phoenix AZ 85044-5318
USA
PPC Test Port Connections Kit
Quick connector on stand
1/8 in. stainless steel tubing (75 cm)
1/8 in. swage x 1/8 in. NPT male adaptor
Quick connector stem, 1/8 in. NPTF
Quick connector stem, 1/4 in. NPTF
Reducer, 1/4 in. swage x 1/8 in. swage
Installation Instructions
071023
Tel 602.431.9100
Fax 602.431.9559
www.dhinstruments.com