Cradlepoint AER1650 Series 사용자 설명서 - 페이지 13

{카테고리_이름} Cradlepoint AER1650 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cradlepoint AER1650 Series 20 페이지. Micro branch router
Cradlepoint AER1650 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (6 페이지)

페이지 인쇄

User Manual

AER1600/AER1650

QUICK START

BASIC SETUP

1. Insert an activated SIM

The Cradlepoint AER1600/AER1650 requires a SIM with an activated wireless broadband data plan. Contact your carrier

for details about selecting a data plan and about the process for provisioning your SIM. Once you have an activated

SIM:

•

For AER1600LPE/AER1650LPE only: Open embedded modem SIM cover on bottom of router and insert activated

SIM into the slot marked SIM 1 (use the other slot, SIM 2, for a secondary/backup SIM). Close embedded modem

SIM cover. NOTE: Router will not operate if embedded modem SIM cover is not fully closed.

•

For all models with removable MC400 modem: Remove MC400 cover from side of router and insert activated

SIM(s) into removable MC400 modem (optional for AER1600LPE/AER1650LPE and AER1600/AER1650). Insert the

SIM card into the slot marked SIM 1 (use the other slot, SIM 2, for a secondary/backup SIM). Insert the card with

the notch-end first and the gold contacts facing down. Reinsert the removable MC400 modem, replace cover, and

insert the included security screw if desired. NOTE: To remove modem, remove MC400 cover, attach included modem

antennas (finger-tighten only), and pull modem straight out.

2. Attach included modem antennas

Antennas are finger-tighten only. Attach to connectors marked MAIN and AUX.

3. Connect the power source

Attach the included adapter to the device and to a power source and loop cable through cable retention slot. Then turn

the power switch on (I).

4. Connect to a computer or other network equipment

Connect via Ethernet or WiFi for local management.

ACCESSING THE ADMINISTRATION PAGES

Once you are connected, open the Cradlepoint AER1600's GUI-based administration

pages to make configuration changes to your router.

Open a browser window and type "cp/" or "192.168.0.1" in the address bar. Press

ENTER/RETURN.

When prompted for your password, type the eight character DEFAULT PASSWORD

found on the product label.

It's possible – and more efficient – to do all your configuration changes through

Cradlepoint

Enterprise Cloud Manager

administration pages. Set up a group of routers and set the configuration for all of

them at once. See

below

for more information about ECM.

NOTE: The product label shown is an example only: your DEFAULT PASSWORD and SSID will be unique.

(ECM) without logging into the local

4/19/16

+1.855.813.3385

cradlepoint.com