User Manual
/
AER1600/AER1650
QUICK START
BASIC SETUP
1. Insert an activated SIM
The Cradlepoint AER1600/AER1650 requires a SIM with an activated wireless broadband data plan. Contact your carrier
for details about selecting a data plan and about the process for provisioning your SIM. Once you have an activated
SIM:
•
For AER1600LPE/AER1650LPE only: Open embedded modem SIM cover on bottom of router and insert activated
SIM into the slot marked SIM 1 (use the other slot, SIM 2, for a secondary/backup SIM). Close embedded modem
SIM cover. NOTE: Router will not operate if embedded modem SIM cover is not fully closed.
•
For all models with removable MC400 modem: Remove MC400 cover from side of router and insert activated
SIM(s) into removable MC400 modem (optional for AER1600LPE/AER1650LPE and AER1600/AER1650). Insert the
SIM card into the slot marked SIM 1 (use the other slot, SIM 2, for a secondary/backup SIM). Insert the card with
the notch-end first and the gold contacts facing down. Reinsert the removable MC400 modem, replace cover, and
insert the included security screw if desired. NOTE: To remove modem, remove MC400 cover, attach included modem
antennas (finger-tighten only), and pull modem straight out.
2. Attach included modem antennas
Antennas are finger-tighten only. Attach to connectors marked MAIN and AUX.
3. Connect the power source
Attach the included adapter to the device and to a power source and loop cable through cable retention slot. Then turn
the power switch on (I).
4. Connect to a computer or other network equipment
Connect via Ethernet or WiFi for local management.
ACCESSING THE ADMINISTRATION PAGES
Once you are connected, open the Cradlepoint AER1600's GUI-based administration
pages to make configuration changes to your router.
1.
Open a browser window and type "cp/" or "192.168.0.1" in the address bar. Press
ENTER/RETURN.
2.
When prompted for your password, type the eight character DEFAULT PASSWORD
found on the product label.
It's possible – and more efficient – to do all your configuration changes through
Cradlepoint
Enterprise Cloud Manager
administration pages. Set up a group of routers and set the configuration for all of
them at once. See
below
for more information about ECM.
NOTE: The product label shown is an example only: your DEFAULT PASSWORD and SSID will be unique.
(ECM) without logging into the local
©2016 Cradlepoint. All Rights Reserved.
4/19/16
|
+1.855.813.3385
|
cradlepoint.com
13
Печатать страницу