DH Instruments PG7000 업그레이드 지침 - 페이지 4

{카테고리_이름} DH Instruments PG7000에 대한 업그레이드 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DH Instruments PG7000 4 페이지. Flash with eeprom to flash without eeprom, non-flash to flash without eeprom
DH Instruments PG7000에 대해서도 마찬가지입니다: 설치 지침 (2 페이지)

페이지 인쇄

PG7000 ™ Upgrade Instructions Flash with EEPROM to Flash without EEPROM,

Flash the PG7000 with PG7000 software ver. 2.02d. (This is available for download at DHI web site:

www.dhinstruments.com). Refer to the instructions provided in Section 5.5 of the PG7000 manual. Remember, a

"null modem" cable must be used to connect the PC to the PG7000 COM2 port.

Reboot the PG7000 following the reboot instructions displayed. When asked whether to upgrade answer, "YES".

Repeat step

and

PG7000 software upgrades are designed to reformat and transfer data as needed. However, various PG7000 user

settings may be reset and/or deleted. The extent depends on the number of revisions between the original and the

newly flashed version. Be sure to check the metrological aspects including piston-cylinder, mass set, mass bell and

internal sensor calibration files as these may be completely deleted and/or reset. See the PG7000 manual.

Remove EEPROMs from U41 and U46.

Deliver the upgraded PG7000 Platform to the customer with the new PG Terminal P/N 401284 and the new PG7000

manual, P/N 550099.

Document 560037c

DH Instruments, Inc.

4765 East Beautiful Lane

Phoenix AZ 85044-5318

USA

with the most recent PG7000 software version.

Calibration Solutions

for Pressure

and Flow™

Non-Flash to Flash without EEPROM

040514

Tel 602.431.9100

Fax 602.431.9559

[email protected]