ensto eFiller 사용 설명서 - 페이지 9

{카테고리_이름} ensto eFiller에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ensto eFiller 12 페이지.

페이지 인쇄

4. User Instructions

4.1 Start Charging

•

Pick up the plug from the holder.

•

Connect the plug to your vehicle.

4.2 Stop Charging

•

Disconnect the plug from your vehicle.

•

Put the plug back to the holder.

4.3 User Interfaces

The eFiller charging point has indicator lights to tell the status of the charging.

The charging sequence and indicator light operation is as follows:

Sequence

Ready to charge

The charging cable is connected properly to the vehicle

The charging cable is connected and waiting for the vehicle to

start charging (for example timer charging)

Charging

The charging cable is connected and the vehicle has ended

charging (for example the battery is full)

Malfunction

No supply power for charging point

5. Troubleshooting

5.1 The vehicle is not charging

•

Ensure that the charging cable is properly connected to the vehicle.

•

Ensure from the vehicle that the vehicle has no timer charging activated. If it is active, en-

able instant charging from the vehicle.

•

Ensure from the indicator light that the charging point supply power is on (the indicator

light is green). If not, check the status of the residual current device (RCD-B) and circuit

breaker (MCB) at the power supply line.

•

Ensure that when you connect the charging cable to a vehicle, the indicator light blinks

green to indicate a good connection to the vehicle.

•

Ensure from the charging point that the indicator light is not red.

Indicator

Green, stable

Green, blinking

Blue, stable

Green, blinking

Red, stable

No light