ensto eFiller Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka ensto eFiller. ensto eFiller 12 stron.

Drukuj stronę

4. User Instructions

4.1 Start Charging

•
Pick up the plug from the holder.
•
Connect the plug to your vehicle.

4.2 Stop Charging

•
Disconnect the plug from your vehicle.
•
Put the plug back to the holder.

4.3 User Interfaces

The eFiller charging point has indicator lights to tell the status of the charging.
The charging sequence and indicator light operation is as follows:
Sequence
Ready to charge
The charging cable is connected properly to the vehicle
The charging cable is connected and waiting for the vehicle to
start charging (for example timer charging)
Charging
The charging cable is connected and the vehicle has ended
charging (for example the battery is full)
Malfunction
No supply power for charging point

5. Troubleshooting

5.1 The vehicle is not charging

•
Ensure that the charging cable is properly connected to the vehicle.
•
Ensure from the vehicle that the vehicle has no timer charging activated. If it is active, en-
able instant charging from the vehicle.
•
Ensure from the indicator light that the charging point supply power is on (the indicator
light is green). If not, check the status of the residual current device (RCD-B) and circuit
breaker (MCB) at the power supply line.
•
Ensure that when you connect the charging cable to a vehicle, the indicator light blinks
green to indicate a good connection to the vehicle.
•
Ensure from the charging point that the indicator light is not red.
RAK130_ENG / © Ensto 2018
Indicator
Green, stable
Green, blinking
Green, blinking
Blue, stable
Green, blinking
Red, stable
No light
9