Dell XPS 430 서비스 매뉴얼 - 페이지 32
{카테고리_이름} Dell XPS 430에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS 430 42 페이지. Dell xps computer setup
Dell XPS 430에 대해서도 마찬가지입니다: 설정 (2 페이지)
페이지 인쇄
System
System Info
Processor Info
Memory Info
PCI Info
Date/Time
Boot Sequence
Drives
SATA Drives 0 through 4
(On default)
eSATA
(On default)
SATA Operation
(RAID On default)
Onboard Devices
Integrated NIC
(On default)
Integrated Audio
(Auto default)
USB Controller
(On default)
Lists system information such as the system model
number, the BIOS version number and date, the
system service tag, express service code and asset
tag, and other system-specific information.
Identifies the processor type, clock speed, bus
speed, L2 cache, L3 cache, ID, and whether the
processor is multiple core capable, supports Hyper-
Threading and supports 64-bit technology.
Identifies the memory type, speed, and channel
mode (dual or single) by DIMM slot location.
Indicates the expansion card type by slot location.
Displays current date and time settings.
The computer attempts to boot from the sequence of
devices specified in this list.
NOTE:
If you insert a boot device and restart the
computer, this option appears in the system setup
menu. To boot from a USB memory device, for
example, select the USB device and move it so that it
becomes the first device in the boot sequence.
Enables or disables drives attached to the SATA
connectors on the system board.
Off — A device attached to the interface is not
l
usable.
On — A device attached to the interface is
l
usable.
Enables or disables eSATA.
Off — eSATA is disabled.
l
On — eSATA is enabled.
l
NOTE:
eSATA is not supported in ATA mode.
Enables or disables RAID (for more information, see
the Dell Technology Guide).
RAID Autodetect/ATA — RAID if signed drives,
l
otherwise ATA.
RAID On — SATA is configured for RAID on
l
every boot.
Enables or disables the integrated network interface
controller (NIC).
Off — The integrated NIC is disabled.
l
On — The integrated NIC is enabled.
l
On w/PXE — The integrated NIC is on (with
l
PXE enabled).
NOTE:
PXE is required only if you are booting to an
operating system located on another computer. If a
boot routine is not available from the remote system,
the computer attempts to boot from the next device
listed in the boot sequence.
Enables or disables the onboard audio controller.
Off — Integrated audio is disabled.
l
On — Integrated audio is enabled.
l
Auto — If installed, the add-in audio controller
l
is enabled.
Enables or disables the internal USB controller. Set to
On (default) so that USB devices will be detected and
supported in the operating system.
Off — The USB controller is disabled.
l
On — The USB controller is enabled.
l
No Boot — The USB controller is enabled;
l