Dell XPS 430 서비스 매뉴얼 - 페이지 34
{카테고리_이름} Dell XPS 430에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS 430 42 페이지. Dell xps computer setup
Dell XPS 430에 대해서도 마찬가지입니다: 설정 (2 페이지)
페이지 인쇄
HDD Acoustic Mode
(Bypass default)
Security
Admin Password
(Not Set default)
System Password
(Not Set default)
Password Changes
(Unlocked default)
Execute Disable
(On default)
Power Management
AC Recovery
(Off default)
Auto Power On
(Off default)
Auto Power Time
Determines the acoustic mode at which the hard
drive operates.
Bypass — Do nothing (needed for older
l
drives).
Quiet — The hard drive operates at a slower,
l
but quieter speed.
Suggested — Allow the hard drive
l
manufacturer to select the mode.
Performance — The hard drive operates at a
l
faster, but possibly noisier speed.
NOTE:
Switching to performance mode may cause an
increase in noise produced by the drive, but does not
affect the drive's performance.
NOTE:
Changing the acoustics setting does not alter
your hard drive image.
Used to prohibit an unauthorized user from changing
any configuration settings in the system setup.
Used to prohibit an unauthorized user from booting
to the operating system.
This option locks the system password field with the
administrator (admin) password.
NOTE:
When the system password field is locked,
you can no longer disable password security by
pressing <Ctrl><Enter> when the computer starts.
Enables or disables Execute Disable Memory
Protection technology.
Off — Execute Disable Memory Protection
l
technology is disabled.
On — Execute Disable Memory Protection
l
technology is enabled.
Specifies how the computer will behave when AC
power is restored after an AC power loss.
Off — The system stays off after AC power is
l
restored.
On — The system powers on after AC power is
l
restored.
Last — The system returns to the previous
l
state after AC power is restored.
Disables or selects when to automatically turn on the
computer.
Off — Do not use the Auto Power Time.
l
Everyday — Turn the computer on every day
l
at the time set in Auto Power Time.
Weekdays — Turn the computer on Monday
l
through Friday at the time set in Auto Power
Time.
NOTE:
This feature does not work if you turn off your
computer using a power strip or surge protector.
Specifies the time to automatically turn on the
computer.
Change the time to automatically turn on the
computer by pressing the up- or down-arrow key to
increase or decrease the numbers, or type the
numbers in the appropriate time field.