Dell XPS 430 서비스 매뉴얼 - 페이지 35

{카테고리_이름} Dell XPS 430에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS 430 42 페이지. Dell xps computer setup
Dell XPS 430에 대해서도 마찬가지입니다: 설정 (2 페이지)

페이지 인쇄
Dell XPS 430 서비스 매뉴얼
Remote Wake Up
(Off default)
Suspend Mode
(S3 default)
 
Maintenance
Service Tag
SERR Message
(On default)
Load Defaults
Event Log
 
POST Behavior
Fastboot
(On default)
Numlock Key
(On default)
POST Hotkeys
(Setup & Boot Menu default)
Keyboard Errors
(Report default)
NOTE:
This feature does not work if you turn off your
computer using a power strip or surge protector.
This option allows the computer to power up when a
Network Interface Controller or Remote Wakeup-
capable modem receives a wake up signal.
 Off — Remote wake up is disabled.
l
 On — Remote wake up is enabled.
l
 On w/Boot to NIC — The computer attempts
l
to boot from a network prior to using the boot
sequence.
Specifies the power management suspend mode.
 S1 — The computer resumes more quickly from
l
sleep mode.
 S3 — The computer conserves more power
l
when not in use (system memory remains
active).
Displays the system service tag.
Controls the SERR message mechanism. Some
graphics cards require that the SERR Message
mechanism be disabled.
 Off — Do not use the SERR message
l
mechanism.
 On — Use the SERR message mechanism.
l
This setting restores the computer's factory-installed
default settings.
 Cancel — Do not restore factory-installed
l
default settings.
 Continue — Restore factory-installed default
l
settings.
Displays the system event log.
 Mark all entries — Mark all event log entries
l
as read (R).
 Clear log — Clear all event log entries.
l
 
NOTE:
Once an event log entry is marked as read (R)
that entry cannot be marked as unread (U).
Enables or disables the option to speed up the boot
process by skipping certain configurations and tests.
 Off — Do not skip any steps in the boot
l
process.
 On — Boot quickly.
l
Enables or disables the numerical and mathematical
features of the rightmost bank of keys on the
keyboard.
 Off — Right keypad keys function as arrows.
l
 On — Right keypad keys function as numbers.
l
Specifies the function keys to display on the screen
when the computer starts.
 Setup & Boot Menu — Display both messages
l
(F2=Setup and F12=Boot Menu).
 Setup — Display the setup message only
l
(F2=Setup).
 Boot Menu — Display the Quickboot message
l
only (F12=Boot Menu).
 None — Neither message is displayed.
l
Enables or disables keyboard error reporting when
the computer starts.
 Report — Display any keyboard errors.
l