Dell Active Fabric Manager 설치 매뉴얼 - 페이지 6

{카테고리_이름} Dell Active Fabric Manager에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Active Fabric Manager 44 페이지. Active fabric manager installation guide 1.5
Dell Active Fabric Manager에 대해서도 마찬가지입니다: 설치 매뉴얼 (19 페이지)

페이지 인쇄

NOTE: VMware® Workstation™ does not support HA and FT.

•

VMware® vSphere® Hypervisor (ESXi) 5.0 and higher (must meet virtual appliance, port access, and listening

port requirements)

NOTE: VMware® vCenter™ is required for HA and FT.

Deploy the OVF with HA and FT

The following are required to implement High Availability (HA) and Fault Tolerance (FT) using a VMware® ESX® Virtual

Machine :

•

VMware® vCenter™ 5.0 Standard License

•

ESXi® 5.0 Enterprise Plus License

•

Dell M1000e chassis, if you are using MXL Blade switches.

•

iSCSI or Fiber Channel Central Storage

•

Shared storage for the OVF

NOTE: By default, the AFM VM CPU is set to 2. To use the HA feature, change the virtual CPU to 1.

Deploy the OVF without HA and FT

The following are required to deploy AFM without the HA/FT solution, using a VMware® ESX® Virtual Machine:

•

VMware® ESXi® 5.0 Open Source License

•

Servers (rack or blade switch). If you are using MXL blade switches, requires a M1000e blade chassis)

•

Shared storage for the OVF

NOTE: By default, the AFM VM CPU is set to 2.

Deploy the OVF with HA

When you deploy the AFM with HA only using a VMware® ESX® VM, the requirements are as follows:

•

VMware® ESXi® 5.0 Open Source License

•

Shared storage for the OVF

NOTE: By default, the AFM VM CPU is set to 2. To use the HA feature, change the virtual CPU to 1.

AFM Client Browser Requirements

•

Internet Explorer® 9

•

Firefox® 12 and higher

Port Usage

To troubleshooting connectivity issues with the AFM server, use the following table