Dell Active Fabric Manager Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сервер Dell Active Fabric Manager. Dell Active Fabric Manager 44 сторінки. Active fabric manager installation guide 1.5
Також для Dell Active Fabric Manager: Посібник з монтажу (19 сторінок)

Друкувати сторінку

NOTE: VMware® Workstation™ does not support HA and FT.

•

VMware® vSphere® Hypervisor (ESXi) 5.0 and higher (must meet virtual appliance, port access, and listening

port requirements)

NOTE: VMware® vCenter™ is required for HA and FT.

Deploy the OVF with HA and FT

The following are required to implement High Availability (HA) and Fault Tolerance (FT) using a VMware® ESX® Virtual

Machine :

•

VMware® vCenter™ 5.0 Standard License

•

ESXi® 5.0 Enterprise Plus License

•

Dell M1000e chassis, if you are using MXL Blade switches.

•

iSCSI or Fiber Channel Central Storage

•

Shared storage for the OVF

NOTE: By default, the AFM VM CPU is set to 2. To use the HA feature, change the virtual CPU to 1.

Deploy the OVF without HA and FT

The following are required to deploy AFM without the HA/FT solution, using a VMware® ESX® Virtual Machine:

•

VMware® ESXi® 5.0 Open Source License

•

Servers (rack or blade switch). If you are using MXL blade switches, requires a M1000e blade chassis)

•

Shared storage for the OVF

NOTE: By default, the AFM VM CPU is set to 2.

Deploy the OVF with HA

When you deploy the AFM with HA only using a VMware® ESX® VM, the requirements are as follows:

•

VMware® ESXi® 5.0 Open Source License

•

Shared storage for the OVF

NOTE: By default, the AFM VM CPU is set to 2. To use the HA feature, change the virtual CPU to 1.

AFM Client Browser Requirements

•

Internet Explorer® 9

•

Firefox® 12 and higher

Port Usage

To troubleshooting connectivity issues with the AFM server, use the following table