Dell Dimension 2400 Series 랙 설치 지침 - 페이지 23

{카테고리_이름} Dell Dimension 2400 Series에 대한 랙 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dimension 2400 Series 32 페이지. Vga card installation instructions
Dell Dimension 2400 Series에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (8 페이지), 설치 지침 (1 페이지), 매뉴얼 (43 페이지)

페이지 인쇄
Dell Dimension 2400 Series 랙 설치 지침
support.dell.com
Installing the PowerEdge System in
the Rack
The subsections that follow include instructions for installing the PowerEdge system.

Installing the Rack Adapters

To install the rack adapters on the computer, perform the following steps.
The following procedure is required only if you are converting a PowerEdge 2400
system from a tower chassis to a rack-ready chassis.
CAUTION: The computer may weigh up to 32 kg (70 lb) when fully loaded.
To prevent personal injury, do not attempt to move the computer by
yourself.
1.
Lay the computer on its top side (see Figure 1-9) on a piece of foam or cardboard
(to prevent damage to the computer while you remove the feet).

Figure 1-9. Computer Orientation

2.
Use a small flat-blade screwdriver to remove the plastic screw from each of the
four rubber feet on the bottom of the chassis (see Figure 1-10).
back of computer
top side
left side
front of computer
Dell PowerEdge 2400 Systems Rack Installation Guide
right side
1-11