Dell Dimension 2400 Series 매뉴얼 - 페이지 35
{카테고리_이름} Dell Dimension 2400 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dimension 2400 Series 43 페이지. Vga card installation instructions
Dell Dimension 2400 Series에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (8 페이지), 랙 설치 지침 (32 페이지), 설치 지침 (1 페이지)
페이지 인쇄
Diskette Drive A:
Displays floppy drive details.
Primary Drive 0:
Displays primary hard drive 0. The default is Auto.
Primary Drive 1:
Displays primary hard drive 1 (if installed). The default is Off.
Secondary Drive 0: Displays secondary hard drive 0.The default is Auto.
Secondary Drive 1: Displays secondary hard drive device type. The default is Off.
IDE Drive UDMA:
Turns IDE Drive UDMA on and off. The default is On.
The following table shows Memory Information option information.
Option
Installed System Memory
System Memory Speed
System Memory Channel Mode Displays the mode of your system memory.
AGP Aperture
The following table shows CPU Information option information.
Option
Function
Hyper-Threading
Enables Hyper-Threading. The default is Disabled.
CPU Speed
Sets the CPU speed. The default is Normal.
Bus Speed
Displays the bus speed.
Processor 0 ID
Displays processor ID.
Clock Speed Displays clock speed.
Cache Size
Displays cache size.
The following table shows Integrated Devices (Legacy Select Options) option information.
Option
Function
Sound
Turns the integrated sound off and on. The default is On.
Network Interface Controller Turns the network interface controller off and on. The default is On.
Mouse Port
Turns the mouse port off and on. The default is On.
USB Emulation
Turns USB emulation off and on. The default is On.
USB Controller
Turns the USB controller off and on. The default is On.
Serial Port 1
Sets serial port options and turns the port off and on. The default is Auto.
Parallel Port
Displays parallel port settings when <Enter> is pressed. The default mode is PS/2 and the I/O address default is 378h.
Diskette Interface
Sets the floppy drive interface options. The default is Auto.
Primary Video Controller
Sets the primary video controller. The default is AGP.
The following table shows Power Management option information.
Option
Function
Suspend Mode
Displays the suspend state used by the computer. The default is S3.
AC Power Recovery Enables AC power recovery to occur. The default is Off.
Low Power Mode
Minimizes power use when the computer is off. The default is Disabled.
The following table shows System Security option information.
Option
Function
Password
Locks and unlocks the password option. The default is Unlocked.
Status
System
Enables and disables the system password. The default is Not enabled.
Password
Setup Password Enables and disables the setup password. The default is Not enabled.
Function
Displays the amount of installed system memory.
Displays the speed of your system memory.
Displays the amount of aperture memory. The default is 128 MB.