Dell Force10 S2410 매뉴얼 - 페이지 17

{카테고리_이름} Dell Force10 S2410에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Force10 S2410 42 페이지. Installing the s2410 system
Dell Force10 S2410에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (31 페이지)

페이지 인쇄

1. Physical Interfaces

Figure 4-2. S2410 Two-post (Front-mounted) Rack-mounting

Four-Post Rack-mounting with Threaded Rails

Ensure that there is adequate clearance surrounding the cabinet or rack to permit access and airflow. If

you are installing two S2410 systems side-by-side, position the two S2410 chassis at least 5 inches (12.7

cm) apart to permit proper airflow.

Attach the rack ears first, using only the supplied screws (see

then follow the steps below to install the S2410 chassis into a four-post 19-inch equipment rack, using the

attached front mounting brackets and the optional adjustable rear-mounting brackets.

Step

Task

Align the three screw holes of the adjustable rear mounting bracket with the three holes in the S2410 chassis, and

secure the mounting bracket with three screws.

Figure 4-3. Four-post Rack-mounting with Adjustable Rear-mounting Brackets, Step 1

Attaching the Rack Ears on page

15), and

Installing the S2410