Dell M3S2G8 시작하기 매뉴얼 - 페이지 28

{카테고리_이름} Dell M3S2G8에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell M3S2G8 32 페이지. Servers for sap hana

Prerequisites

The initial configuration is complete.

Steps

1. Start the SHC:

a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to

the settings. The Authentication page opens.

b. Complete the Username and Password fields and click Log On. The System Control page opens.

2. Launch the Remote System Console.

From the System Control tab, click Remote Console > Launch. The Remote System Console opens in a new window.

NOTE:

See the SHC Reference Guide for more information.

WARNING:

Important: Be sure to select NO when the Java security warning asks if the execution of

potentially dangerous components should be blocked.

NOTE:

With some Java updates, the Remote System Console is prevented from loading by Java security checks. In

this case, the Remote System Console URL must be added to the Exception Site List in the Java control panel.

3. Launch the BIOS interface:

a. Click Power > Power Management to open the Power Management page.

b. Click Power On to launch the boot sequence.

c. Switch to the Remote Console screen.

d. Press Esc when the Press Esc for boot options message is displayed.

Figure 17. BIOS launch screen

4. Select the boot device:

a. Using the navigation arrows, select Boot Manager from the main menu and press Enter.

Boot the server