Dell M3S2G8 시작하기 매뉴얼 - 페이지 32
{카테고리_이름} Dell M3S2G8에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell M3S2G8 32 페이지. Servers for sap hana
Check the board and security messages log
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Check the board and security messages log:
a. From the Monitoring tab, click Messages to open the Messages page.
b. Browse messages, as required, using the navigation arrows or page number buttons.
CAUTION:
This log can record up to 2,000 events. Once this limit is reached, the arrival of new messages will
automatically delete the oldest messages in the log.
Get Management Controller information
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Get Management Controller Information:
From the Maintenance tab, click Hardware Information > Management Controller to display the Management
Controller Information page.
Display firmware version
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Display the firmware version:
From the Maintenance tab, click Hardware Information > Firmware Version to display the Firmware Version page.
32
Basic Operations