Dell M3S2G8 Посібник для початківців - Сторінка 32
Переглянути онлайн або завантажити pdf Посібник для початківців для Сервер Dell M3S2G8. Dell M3S2G8 32 сторінки. Servers for sap hana
Друкувати сторінку
Check the board and security messages log
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Check the board and security messages log:
a. From the Monitoring tab, click Messages to open the Messages page.
b. Browse messages, as required, using the navigation arrows or page number buttons.
CAUTION:
This log can record up to 2,000 events. Once this limit is reached, the arrival of new messages will
automatically delete the oldest messages in the log.
Get Management Controller information
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Get Management Controller Information:
From the Maintenance tab, click Hardware Information > Management Controller to display the Management
Controller Information page.
Display firmware version
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Display the firmware version:
From the Maintenance tab, click Hardware Information > Firmware Version to display the Firmware Version page.
32
Basic Operations