Dell M3S2G8 시작하기 매뉴얼 - 페이지 6

{카테고리_이름} Dell M3S2G8에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell M3S2G8 32 페이지. Servers for sap hana

Prerequisites

The site power breaker must be OFF when the Power Distribution Unit (PDU) is connected. The site power supply must remain

OFF until the system is ready to be powered on.

About this task

For each server module, perform the following steps:

Steps

1. Locate the power supply connections of each server module.

Figure 1. Power supply connections - rear view

2. On a S5416 server, locate the power supply connections of the UBox.

Figure 2. Power supply connections of the UBox - rear view

3. Connect the module to the PDU:

a. Route each power cord along the cabinet flange to the PDU.

b. Plug each power cord into the required PDU.

Connecting the Server