Dell OptiPlex FX170 마운팅 매뉴얼 - 페이지 6

{카테고리_이름} Dell OptiPlex FX170에 대한 마운팅 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell OptiPlex FX170 8 페이지. Re-imaging guide
Dell OptiPlex FX170에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 기술 매뉴얼북 (10 페이지), 기술 매뉴얼북 (8 페이지)

페이지 인쇄

Insert the screws to secure the VESA bracket.

NOTE: The VESA mount above is secured to the back of a monitor. Make sure

the mounting bracket is secured as shown above.

Slide the VESA mounting plate attached to your thin client onto the

VESA mounting bracket.

Mounting the VESA Bracket to a Wall

WARNING: Before beginning, turn off the thin client, disconnect the AC

adapter from the electrical outlet and the thin client, and remove any other

external cables from the thin client.

WARNING: Before installing your thin client in an enclosure, read the safety

instructions that shipped with your thin client.

CAUTION: Use a wall that supports at least 20 lbs. (9.1kg) of weight. Use

appropriate mounting hardware depending on wall material (hardware not

included).

Insert the screws to secure the VESA mounting bracket to the wall.

Slide the VESA mounting plate attached to your thin client onto the

VESA mounting bracket.

WARNING: Before mounting the chassis to the wall bracket ensure that none

of the vents are blocked on the system.