Dell OptiPlex FX170 Montaj Kılavuzu - Sayfa 6

Sunucu Dell OptiPlex FX170 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. Dell OptiPlex FX170 8 sayfaları. Re-imaging guide
Ayrıca Dell OptiPlex FX170 için: Manuel (18 sayfalar), Teknik El Kitabı (10 sayfalar), Teknik El Kitabı (8 sayfalar)

Sayfayı Yazdır

Insert the screws to secure the VESA bracket.

NOTE: The VESA mount above is secured to the back of a monitor. Make sure

the mounting bracket is secured as shown above.

Slide the VESA mounting plate attached to your thin client onto the

VESA mounting bracket.

Mounting the VESA Bracket to a Wall

WARNING: Before beginning, turn off the thin client, disconnect the AC

adapter from the electrical outlet and the thin client, and remove any other

external cables from the thin client.

WARNING: Before installing your thin client in an enclosure, read the safety

instructions that shipped with your thin client.

CAUTION: Use a wall that supports at least 20 lbs. (9.1kg) of weight. Use

appropriate mounting hardware depending on wall material (hardware not

included).

Insert the screws to secure the VESA mounting bracket to the wall.

Slide the VESA mounting plate attached to your thin client onto the

VESA mounting bracket.

WARNING: Before mounting the chassis to the wall bracket ensure that none

of the vents are blocked on the system.