Dell PowerEdge 2410 매뉴얼

{카테고리_이름} Dell PowerEdge 2410에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2410 20 페이지. Cabling poweredge t610
Dell PowerEdge 2410에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 매뉴얼 (17 페이지), 매뉴얼 (12 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 매뉴얼 (9 페이지), 매뉴얼 (10 페이지), 매뉴얼 (12 페이지), 매뉴얼 (11 페이지), 매뉴얼 (8 페이지)

페이지 인쇄

About Warnings

WARNING:

or death.

Coupling Two Racks

WARNING:

to couple two rack cabinets by yourself.

NOTE:

For complete rack installation instructions, see your rack installation guide.

1 Unpack and set up both racks.

2 Unpack the coupling kit, shown in Figure 1-1.

The contents of the rack coupling kit include:

•

One gasket strip

•

Four coupling brackets

Figure 1-1. Rack Coupling Kit

3 Remove the doors and side panels from both racks. See "Removing the Front

Door", "Opening and Removing the Back Doors", and "Removing and

Replacing the Side Panels" in your rack installation guide.

4 Cut and place a segment of the gasket strip, with its protective backing

removed, on one of the racks along the frame surface to be in contact with

the adjacent rack (see Figure 1-2).

NOTE:

as long as the strips protect both racks from being scratched.

October 2008

A WARNING indicates a potential for property damage, personal injury,

Because of the size and weight of the rack cabinets, never attempt

gasket strip

It does not matter on which rack you place the gasket strips,

coupling bracket (4)