Dell PowerEdge 2550 랙 설치 지침 - 페이지 34
{카테고리_이름} Dell PowerEdge 2550에 대한 랙 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2550 40 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 2550에 대해서도 마찬가지입니다: 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (32 페이지), 구성 매뉴얼 (10 페이지), 활성화 매뉴얼 (32 페이지), 설치 매뉴얼 (32 페이지), 매뉴얼 (28 페이지), 매뉴얼 (15 페이지)
페이지 인쇄
Installing the System in the Rack
The subsections that follow include instructions for installing the system in the rack.
CAUTION: If you are installing more than one system, install the first system in
the lowest available position in the rack. Never pull more than one component
out of the rack at a time.
Pull the two interior slide assemblies out of the rack until they lock in the fully
1
extended position.
CAUTION: Because of the size and weight of the system, never attempt to install
the system in the slide assemblies by yourself.
Lift the system into position.
2
Place one hand on the front-bottom of the system and the other hand on the back-
3
bottom of the system.
Tilt the system while aligning the back shoulder nuts on the sides of the system with
4
the back slots on the slide assemblies (see Figure 1-21).
Engage the back shoulder nuts in the slot just behind the back (green) latch first,
5
followed by the middle shoulder nut in the slot near the middle (yellow) latch. Finally,
engage the front shoulder nut in the front slot.
Push the system inward on the slide assemblies until the middle (yellow) latch clicks
6
into place, locking the slide to the middle shoulder nut (see Figure 1-21).
1-28
Rac k I n st allat io n G uide