Dell PowerEdge 2550 랙 설치 지침 - 페이지 32

{카테고리_이름} Dell PowerEdge 2550에 대한 랙 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2550 40 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 2550에 대해서도 마찬가지입니다: 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (32 페이지), 구성 매뉴얼 (10 페이지), 활성화 매뉴얼 (32 페이지), 설치 매뉴얼 (32 페이지), 매뉴얼 (28 페이지), 매뉴얼 (15 페이지)

페이지 인쇄

Installing the Slide Assemblies in the Rack

NOTE: If Dell installed the slide assemblies, you can skip this section.

At the front of the rack cabinet, position one of the slide assemblies so that its

mounting bracket flange fits between the marks or tape you placed on the rack,

marking the upper and lower edges of the template (see Figure 1-19).

The hooks on the mounting bracket should align with the marks you made from the

V-shaped notches in the template.

Align the slide-assembly mounting-bracket flange (on the front of the slide assembly)

with the square holes in the front vertical rail (see Figure 1-20).

Push forward until the mounting tabs are secure in the square holes on the vertical rail

and the push-button clicks and pops out.

Push back on the back slide assembly mounting bracket flange until the mounting tabs

lock into the square holes on the back vertical rail.

Repeat steps 1 through 7 for the remaining slide assembly on the other side of

the rack.

1-26

Rac k I n st allat io n G uide