Dell PowerEdge 2550 Instrukcja instalacji stojaka - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja instalacji stojaka dla Serwer Dell PowerEdge 2550. Dell PowerEdge 2550 40 stron. Wake-on-lan (wol) support on dell servers
Również dla Dell PowerEdge 2550: Instrukcja instalacji (26 strony), Instrukcja instalacji (32 strony), Podręcznik konfiguracji (10 strony), Instrukcja aktywacji (32 strony), Instrukcja instalacji (32 strony), Podręcznik (28 strony), Podręcznik (15 strony)

Installing the Slide Assemblies in the Rack

NOTE: If Dell installed the slide assemblies, you can skip this section.

At the front of the rack cabinet, position one of the slide assemblies so that its

mounting bracket flange fits between the marks or tape you placed on the rack,

marking the upper and lower edges of the template (see Figure 1-19).

The hooks on the mounting bracket should align with the marks you made from the

V-shaped notches in the template.

Align the slide-assembly mounting-bracket flange (on the front of the slide assembly)

with the square holes in the front vertical rail (see Figure 1-20).

Push forward until the mounting tabs are secure in the square holes on the vertical rail

and the push-button clicks and pops out.

Push back on the back slide assembly mounting bracket flange until the mounting tabs

lock into the square holes on the back vertical rail.

Repeat steps 1 through 7 for the remaining slide assembly on the other side of

the rack.

1-26

Rac k I n st allat io n G uide