Dell PowerEdge 2800 수동 변환 - 페이지 9
{카테고리_이름} Dell PowerEdge 2800에 대한 수동 변환을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2800 36 페이지. Poweredge 2800 server
Dell PowerEdge 2800에 대해서도 마찬가지입니다: 정보 업데이트 (24 페이지), 설치 매뉴얼 (22 페이지), 매뉴얼 (44 페이지), 하드웨어 설치 (14 페이지), 빠른 참조 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Y1001bk0.book Page 7 Thursday, July 8, 2004 4:32 PM
Important Safety Information
Observe the safety precautions in the following subsections when installing your system in the rack.
CAUTION:
You must strictly follow the procedures in this document to protect yourself as well as
others who may be involved. Your system may be very large and heavy, and proper preparation and
planning are important to prevent injury to yourself and to others. This becomes increasingly important
when systems are installed high up in the rack.
Rack Stabilizer Feet
CAUTION:
Installing systems in a rack without the front and side stabilizer feet installed could cause
the rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore,
always install the stabilizer feet before installing components in the rack.
CAUTION:
After installing systems in a rack, never pull more than one system out of the rack on its
slide assemblies at one time. The weight of more than one extended system could cause the rack to tip
over and cause injury.
The stabilizer feet help prevent the rack from tipping over when a system or other component is
pulled out of the rack with the slide assemblies fully extended. See the documentation provided
with the rack cabinet for instructions on installing and anchoring the stabilizer feet.
Installing the Tower-to-Rack Kit
CAUTION:
The system may weigh up to 49 kilograms (108 pounds) when fully loaded. To prevent
personal injury, do not attempt to move the system by yourself.
Tower-to-Rack Kit Contents
The tower-to-rack kit includes the following items (see Figure 1-1):
•
One rack front panel with rack handles and thumbscrews
•
Twenty-two 6-32 x 0.312-inch black flat-head Torx screws
•
One rack bezel, complete with keylock, keys, and attaching hardware
•
Six 10-32 shoulder nuts
•
Rack control panel carrier assembly kit
Tower-to-Rack and Rack-to-Tower Conversion Guide
7