Dell PowerEdge 2970 정보 업데이트 - 페이지 3
{카테고리_이름} Dell PowerEdge 2970에 대한 정보 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2970 29 페이지. System memory information update — 8 gb memory modules
Dell PowerEdge 2970에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (14 페이지), 설치 매뉴얼 (10 페이지), 정보 업데이트 (7 페이지)
페이지 인쇄
System Board Jumpers
The jumper settings shown in Figure 6-1 and described in Table 6-1 of your system's Hardware Owner's
Manual are incorrect.The correct settings are shown in Figure 1 and described in Table 2.
Figure 1. System Board Jumpers
Table 2. System Board Jumper Settings
Jumper
Setting
NVRAM_CLR
PWRD_EN
Description
(default)
The configuration settings are retained at system boot.
The configuration settings are cleared at the next system boot. (If the
configuration settings become corrupted to the point where the system
will not boot, install the jumper and boot the system. Remove the jumper
before restoring the configuration information.)
(default)
The password feature is enabled.
The password feature is disabled.