Dell PowerEdge 300 매뉴얼 확인 - 페이지 8
{카테고리_이름} Dell PowerEdge 300에 대한 매뉴얼 확인을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 300 27 페이지. Power supply update
Dell PowerEdge 300에 대해서도 마찬가지입니다: 업데이트 (2 페이지)
페이지 인쇄7-8
Installation and Troubleshooting Guide
to an IDE connector on the system board. (For more information, see Chapter 9,
"Installing Drives.")
During an installation or troubleshooting procedure, you may be required to change
a jumper or switch setting. For information on the system board jumpers, see
Appendix B, "Jumpers, Switches, and Connectors."
Rotating the Power Supply Away From the
System Board
To access some components on the system board, you may have to rotate the sys-
tem power supply out of the way. Use the following procedure to rotate the power
supply:
1.
Remove the computer cover as instructed in "Removing the Computer Cover"
earlier in this chapter.
2.
Disconnect the AC power cable from the AC power receptacle on the back of the
power supply (see "Rotating the Power Supply").
power supply
AC power
receptacle
AC power
cable
Figure 7-6. Rotating the Power Supply
3.
Free the power supply by pressing the securing tab labeled "RELEASE," then
rotate the power supply upward until it locks in one of its extended positions.
DC power
cables
securing tab