Dell PowerEdge 4200 Series 랙 설치 - 페이지 26

{카테고리_이름} Dell PowerEdge 4200 Series에 대한 랙 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4200 Series 34 페이지. Dell poweredge 4200 servers: installation guide
Dell PowerEdge 4200 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (28 페이지), 랙 설치 (37 페이지)

페이지 인쇄

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

Rack Installation Guide

Install three shoulder screws on each side of the computer (see Figure 9).

Install the shoulder screws in the three holes that are closest to the center of the

chassis side.

10-32 x 0.25-inch pan-

head Phillips screws

(2 each rack adapter)

rack adapters (2)

Figure 9. Installing the Rack Adapter and Shoulder Screws

Install the two rack adapters on the computer (see Figure 9).

Secure a rack adapter to each side of the computer with two 10-32 x 0.25-inch

pan-head Phillips screws.

Repeat steps 3 and 4 to install the shoulder screws and rack adapters on the

opposite side of the computer.

Installing the System in the Rack

CAUTION: If you are installing more than one computer, install the first

computer in the lowest available position in the rack.

CAUTION: Never pull more than one component out of the rack at a time.

Pull the two interior slide assemblies out of the rack until they lock in the

extended position.

CAUTION: Because of the size and weight of the computer, never attempt to

install the computer in the slide assemblies by yourself.

DELL CONFIDENTIAL - Preliminary

shoulder

screws (3 each

side)

9/8/00