Dell PowerEdge 4200 Series 랙 설치 - 페이지 28

{카테고리_이름} Dell PowerEdge 4200 Series에 대한 랙 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4200 Series 34 페이지. Dell poweredge 4200 servers: installation guide
Dell PowerEdge 4200 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (28 페이지), 랙 설치 (37 페이지)

페이지 인쇄

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

Rack Installation Guide

Installing the Cable Tray

Attach the cable tray to the PowerEdge computer chassis using five 6-32 x 0.25-inch

hex-head Phillips screws (see Figure 11).

NOTICE: The cable tray and its mounting are not sturdy enough to support

the weight of the PowerEdge chassis, so do not grasp the cable tray when

lifting the system. You should lift the system only by the chassis edges.

Figure 11. Installing the Cable Tray

Installing the Cable-Management Arm

You can install the cable-management arm on either side of the cable tray. See the

section "Reversing the Cable-Management Arm Installation" found later in this guide.

Facing the back of the rack cabinet, attach the right-angle bracket of the cable-

management arm to the cabinet's back vertical rail and secure it with the captive

thumbscrews (see Figure 12). The bracket slides into the square mounting holes

on the vertical rail.

DELL CONFIDENTIAL - Preliminary

cable tray

6-32 x 0.25-inch hex-head

Phillips screws (5)

9/8/00