Dell Poweredge 6100/200 하드웨어 매뉴얼 - 페이지 10

{카테고리_이름} Dell Poweredge 6100/200에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Poweredge 6100/200 15 페이지. Microprocessor replacement
Dell Poweredge 6100/200에 대해서도 마찬가지입니다: 보충 설명서 (4 페이지)

페이지 인쇄
Dell Poweredge 6100/200 하드웨어 매뉴얼
8
Dell PowerEdge 6100/200 System Microprocessor Replacement
M
icroprocessor and Heat Sink
The computer can have up to four microprocessors installed.
microprocessor
socket
Figure 6. Microprocessor Configuration
To remove the microprocessor/heat sink assembly, follow these steps:
1. Remove the left computer cover.
2. Remove the support panel and the appropriate microprocessor module.
3. Remove the microprocessor securing clip from the microprocessor/heat
sink assembly (see Figure 7).
WARNING: The microprocessor chip can get extremely hot during
system operations. Be sure the chip has had sufficient time to cool
before touching it.
microprocessor
securing clip
heat sink
thermal interface pad
(attached to the heat sink)
microprocessor
pin-1 corner of
socket
front tab