DH Lifelabs Aaira + HEPA AAHE-50WH04C 사용 설명서 - 페이지 4

{카테고리_이름} DH Lifelabs Aaira + HEPA AAHE-50WH04C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DH Lifelabs Aaira + HEPA AAHE-50WH04C 10 페이지.

Product Overview

1. Main Body

2. 3-Stage H13 True HEPA Filter

3. HOCl Generator

4. Cold Evaporation Filter (CEF)

5. Salt Bottle with 1 Gram Scoop

3 5 3

The Aaira + HEPA incorporates a 4-stage cleaning system to help clean the air. A fan

forces air through the unit from bottom to top.

STAGE 1: Pre-filter.

STAGE 2: H13 True HEPA Filter.

The true High Efficiency Particulate Air (HEPA) filter captures up to 99.97% of particles

down to 0.3 microns in diameter.

STAGE 3: Activated Carbon Filter.

The activated carbon filter absorbs odors, gases, and volatile organic compounds (VOCs).

STAGE 4: HOCl Generator System.

Hypochlorous acid is generated inside the machine, and absorbed by the cold

evaporation filter. The liquid is evaporated as air passes through the cold evaporation

filter. This disperses the HOCl throughout the airspace in the room allowing it to destroy

a variety of bacteria and viruses.

Remove the unit from the box and check that all the items shown in the product

overview are included. Retain the packaging for storing the unit or in the event it

must be shipped back for service.

The unit is shipped with the H13 True HEPA filter sealed inside a package wrap.

Detach the bottom cover and remove the package wrap. Then remove the filter

out, replace it inside the device and replace the bottom cover.

The unit is also shipped with protective polyfoam above the HOCl generator

assembly. Detach the top cover and remove the protective polyfoam. Then replace

the top cover.

Locate the unit on a flat, solid surface in proximity to the electrical outlet.

Connect the power cord to the unit, and route the power cord to the outlet, but

do not plug it in yet. Make sure that the power cord is out of the way and does not

pose a tripping hazard, and is out of reach of children and pets.

Plug in the unit.