DH Lifelabs Aaira + HEPA AAHE-50WH04C 사용 설명서 - 페이지 6

{카테고리_이름} DH Lifelabs Aaira + HEPA AAHE-50WH04C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DH Lifelabs Aaira + HEPA AAHE-50WH04C 10 페이지.

페이지 인쇄

Alerts

(SOLID)

Low Salt Alert

High Salt Alert

Solid salt level indicator

Flashing salt level indicator

Sound alert

What to do:

(SOLID)

1. Power off device

2. Empty HOCl Generator

Low Water Alert

3. Rinse the CEF

Solid water level indicator

4. Fill water to Max line

Sound alert

5. Add 1 scoop total (1

Cleaning Your Aaira + HEPA

The unit should be cleaned regularly. Clean the HOCl Generator with fresh water. Use

a clean, dry cloth for the external surfaces of the machine. If water stays in the HOCl

Generator for 7 days follow the alert process.

Maintenance Alert

Flashing water level indicator

Flashing salt level indicator

What to do:

1. Power off device

2. Empty HOCl Generator

3. Rinse the CEF

4. Fill water to Max line

5. Add 1 scoop total (1 gram)

of non-iodized salt

(FLASHING)

HOCl Generator Alert

Flashing water level indicator

What to do:

1. Power off device

2. Remove HOCl Generator

and reposition correctly in

device

gram) of non-iodized

salt and stir evenly

Descaling

Lime scale builds up in the machine

over time. To ensure the best

performance, descale monthly.

What to do:

1. Power off device

2. Empty HOCl Generator

3. Take out the CEF

4. Add 200ml (7 oz) of 5% white

vinegar; leave for 1 hour

(do not turn device power on)

5. Empty and clean HOCl Generator

with fresh water

Using Wi-Fi & DH Lifelabs App

(only apply to AAHE-50XX04C Wi-Fi Enabled model)

Aaira+ HEPA can connect with your smart device when you download the DH Lifelabs App.

Follow the steps below and/or in the App.

1. On your smartphone, install DH Lifelabs app and turn your Location authorization and

Bluetooth function on.

2. Open DH Lifelabs app and add the device.

3. There are two ways to add your device, pls kindly select either ways to help.

- Recommended way: Auto discovering device. Make sure the device is turned on, APP will

search for nearby devices automatically. Follow in-APP instruction to click "ADD", select the

device you have and click "+", APP will read your WIFI network and start to add the device

automatically.

- Add Manually. Select the device you have, APP will read your WIFI network, follow in-

APP instruction to turn on the device and long press WIFI button for 3s to pairing mode,

connect to the hotspot of the device in "SmartLife-XXXX", then APP will connect to the

device step by step.

To disconnect from the network, press the

Wi-Fi Status Indicator/Button. The unit will

beep and the indicator will flash red.

Using the Schedule Function

Using the DH Lifelabs App operation you can set up a schedule to turn the Aaira + HEPA

on or off time (like an alarm clock) in advance. You can also set up the desired operating

mode including, fan speed, plasma on/off function or sleep mode. For example, if you set

the machine on at 22:30 in sleep mode, it will be turned on immediately at 22:30 at night

and enter sleep mode.

Voice Control

Using the DH Lifelabs App operation you connect with your voice equipment for the

control, following the instruction codes your voice equipment have. Works with Google

Home or Amazon Alexa.

GET IT ON

DH Lifelabs App