Dell PowerEdge 6400 매뉴얼 - 페이지 3

{카테고리_이름} Dell PowerEdge 6400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 6400 10 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 6400에 대해서도 마찬가지입니다: 랙 설치 (37 페이지), 업그레이드 설치 매뉴얼 (42 페이지), 랙 설치 (34 페이지), 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (37 페이지), 설치 (4 페이지), 조립 및 설치 (32 페이지), 매뉴얼 (10 페이지), 매뉴얼 (15 페이지)

페이지 인쇄
Dell PowerEdge 6400 매뉴얼
support.dell.com
This document describes the installation procedure for the optional small computer
system interface (SCSI) backplanes for the Dell PowerEdge 4x00 and 6x00 systems.
To replace your computer's SCSI backplane board with a different backplane board,
perform the following steps.
1.
Turn off the system, including any attached peripherals, and disconnect the sys-
tem from the electrical outlet.
2.
Unpack the SCSI backplane board upgrade kit.
3.
Remove the computer cover and front bezel.
4.
Remove the hard-disk drives from the system.
5.
Slide the system board tray to its service position.
6.
Disconnect the SCSI cable from the SCSI backplane board.
To avoid damage to the cable, use the strain-relief loop to disconnect the cable.
SCSI Backplane Option
1