Dell PowerEdge External Media System 753 매뉴얼 - 페이지 10
{카테고리_이름} Dell PowerEdge External Media System 753에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge External Media System 753 29 페이지. Statement of volatility
Dell PowerEdge External Media System 753에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (12 페이지), 매뉴얼 (38 페이지), 매뉴얼 사용 (16 페이지), 구성 (16 페이지), 매뉴얼 (10 페이지)
Updating BIOS on Dell 12G PowerEdge Servers
3. Follow the remaining prompts to perform the update.
4. The system will reboot and launch Lifecycle Controller (Figure 3).
5. The Lifecycle Controller will invoke the BIOS update (Figure 4). This may take a few minutes.
After the BIOS is updated, a system reboot will automatically take place and boot back to the
host operating system.
DOS-based BIOS Flash Utility
The DOS or DRMK (Dell Real Mode Kernel)-based BIOS flash utility for each platform can also be found
at the Dell support website. Note that you must have DOS bootable media, such as a USB key. To
update the BIOS using this utility, perform the following steps:
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS-recognizable format (8.3). If you do not update the
filename to 8.3 format, the file name will be truncated to 8.3 format.
3. For more information on the 8.3 format, refer to http://en.wikipedia.org/wiki/8.3_filename.
Figure 5.
Linux DUP
10