Dell PowerEdge External Media System 753 Handmatig - Pagina 10
Blader online of download pdf Handmatig voor {categorie_naam} Dell PowerEdge External Media System 753. Dell PowerEdge External Media System 753 29 pagina's. Statement of volatility
Ook voor Dell PowerEdge External Media System 753: Aan de slag handleiding (12 pagina's), Handmatig (38 pagina's), Handmatig gebruiken (16 pagina's), Configuratie (16 pagina's), Handmatig (10 pagina's)
Pagina afdrukken
Updating BIOS on Dell 12G PowerEdge Servers
3. Follow the remaining prompts to perform the update.
4. The system will reboot and launch Lifecycle Controller (Figure 3).
5. The Lifecycle Controller will invoke the BIOS update (Figure 4). This may take a few minutes.
After the BIOS is updated, a system reboot will automatically take place and boot back to the
host operating system.
DOS-based BIOS Flash Utility
The DOS or DRMK (Dell Real Mode Kernel)-based BIOS flash utility for each platform can also be found
at the Dell support website. Note that you must have DOS bootable media, such as a USB key. To
update the BIOS using this utility, perform the following steps:
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS-recognizable format (8.3). If you do not update the
filename to 8.3 format, the file name will be truncated to 8.3 format.
3. For more information on the 8.3 format, refer to http://en.wikipedia.org/wiki/8.3_filename.
Figure 5.
Linux DUP
10