Dell PowerEdge FD332 소유자 매뉴얼 - 페이지 19

{카테고리_이름} Dell PowerEdge FD332에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge FD332 46 페이지.
Dell PowerEdge FD332에 대해서도 마찬가지입니다: 시작하기 (2 페이지)

페이지 인쇄
Dell PowerEdge FD332 소유자 매뉴얼
Steps
1
Using a Phillips #2 screwdriver, turn the storage sled locks on the sled front panel to unlock position.
CAUTION:
If you are permanently removing the sled, install a sled blank. Operating the enclosure for extended periods of
time without a sled blank installed can cause the enclosure to overheat.
2
Lift the sled release latches upward by 90 degrees, and holding it by the latches, pull the sled out of the enclosure.
CAUTION:
To protect the I/O connector pins, install the I/O connector cover every time a sled is removed from the
enclosure.
3
Install the I/O connector cover over the I/O connectors.
Figure 16. Removing a storage sled
1
sled lock (2)
3
sled release latch (2)
2
dotted line on storage sled
Installing and removing storage sled components
19