Dell PowerEdge PowerEdge Rack 4820 매뉴얼 - 페이지 6

{카테고리_이름} Dell PowerEdge PowerEdge Rack 4820에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge PowerEdge Rack 4820 9 페이지. Rack mounting equipment shelf
Dell PowerEdge PowerEdge Rack 4820에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 매뉴얼 (20 페이지), 매뉴얼 (17 페이지), 매뉴얼 (12 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 매뉴얼 (10 페이지)

Dell PowerEdge PowerEdge Rack 4820 매뉴얼
Cabling the Dell™ PowerEdge™ R710 
 
Figure 3:  Routing the Cables Through the CMA 
 
 
 
 
 
 
 
 
 
NOTE: Do not store excess
cable slack inside the CMA.
 
The cable may protrude
through the CMA causing
 
binding and potentially
damaging the cable.
 
3. Once all the cables are routed through the CMA, dress the cables between the back of the system and the 
entrance of the CMA with the tie wraps provided in the CMA kit. The tie wraps are shown in yellow in all 
illustrations. 
4. Clip off the excess length of material from the tie wraps and make sure that the tie wraps are positioned to 
avoid interference with adjacent systems.  
5. Return the CMA to the closed (retracted) position. 
6. Extend the system from the rack to verify there is sufficient slack in the cables at both the entrance and exit of 
the CMA. 
7. See Figure 4 for an example of a completed left side mounted CMA installation. 
 
 
Cables entering CMA should
have a small amount of slack
to avoid cable strain when
CMA is extended.
Page 4