Dell PowerEdge R610 업데이트 매뉴얼

{카테고리_이름} Dell PowerEdge R610에 대한 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R610 14 페이지. Poweredge series
Dell PowerEdge R610에 대해서도 마찬가지입니다: 문서 업데이트 (14 페이지), 업데이트 매뉴얼 (32 페이지), 정보 업데이트 (14 페이지), 정보 업데이트 (38 페이지), 업데이트 매뉴얼 (44 페이지), 설치 지침 (2 페이지), 매뉴얼 (10 페이지), 하드웨어 설치 지침 (2 페이지), 포트폴리오 매뉴얼 (27 페이지), 데이터시트 (2 페이지), 유지 관리 및 문제 해결 (24 페이지)

Dell PowerEdge R610 업데이트 매뉴얼
Information Update
®
Microsoft
The following issues are documented on the Microsoft Help and Support website
at support.microsoft.com:
Systems running Microsoft
cannot be set into hibernation mode if they have more than 4 GB of memory
installed. For more information, see the knowledge base article at
support.microsoft.com/kb/888575.
Systems running Windows Server 2008 do not support iSCSI boot when they
have an SD card installed in the internal SD module. In addition, iSCSI boot
does not work when an external USB storage device is plugged into the system.
This is a known issue by Microsoft. For more information, see the knowledge
base article at support.microsoft.com/kb/968410.

Flash Memory

The VFlash media provided by Dell is not partitioned to support the iDRAC6
Enterprise virtual flash feature. When you use the virtual flash feature for the
first time, you are prompted to format the media using the iDRAC GUI.
Unified Server Configurator
®
Red Hat
Enterprise Linux
Configurator operating system deployment.
MAC Address Label
For security reasons, the embedded NIC and iDRAC6 Enterprise MAC address
labels provided with your system cannot be affixed once they have been removed.
NOTE:
On Dell PowerEdge R610 and PowerEdge R710 systems, the labels are located
on the information panel on the front of the system. On the PowerEdge T610 system,
the labels are located on the front of the system.
March 2009
Updates
®
Windows Server
®
5.3 does not work with the Unified Server
®
2003 or Windows Server 2008