Dell PowerEdge R610 Güncelleme Kılavuzu

Sunucu Dell PowerEdge R610 için çevrimiçi göz atın veya pdf Güncelleme Kılavuzu indirin. Dell PowerEdge R610 14 sayfaları. Poweredge series
Ayrıca Dell PowerEdge R610 için: Dokümantasyon Güncellemesi (14 sayfalar), Güncelleme Kılavuzu (32 sayfalar), Bilgi Güncellemesi (14 sayfalar), Bilgi Güncellemesi (38 sayfalar), Güncelleme Kılavuzu (44 sayfalar), Kurulum Talimatları (2 sayfalar), Manuel (10 sayfalar), Donanım Kurulum Talimatları (2 sayfalar), Portföy Kılavuzu (27 sayfalar), Veri Sayfası (2 sayfalar), Bakım ve Sorun Giderme (24 sayfalar)

Information Update

Microsoft

The following issues are documented on the Microsoft Help and Support website

at support.microsoft.com:

•

Systems running Microsoft

cannot be set into hibernation mode if they have more than 4 GB of memory

installed. For more information, see the knowledge base article at

support.microsoft.com/kb/888575.

•

Systems running Windows Server 2008 do not support iSCSI boot when they

have an SD card installed in the internal SD module. In addition, iSCSI boot

does not work when an external USB storage device is plugged into the system.

This is a known issue by Microsoft. For more information, see the knowledge

base article at support.microsoft.com/kb/968410.

Flash Memory

The VFlash media provided by Dell is not partitioned to support the iDRAC6

Enterprise virtual flash feature. When you use the virtual flash feature for the

first time, you are prompted to format the media using the iDRAC GUI.

Unified Server Configurator

Red Hat

Enterprise Linux

Configurator operating system deployment.

MAC Address Label

For security reasons, the embedded NIC and iDRAC6 Enterprise MAC address

labels provided with your system cannot be affixed once they have been removed.

NOTE:

On Dell PowerEdge R610 and PowerEdge R710 systems, the labels are located

on the information panel on the front of the system. On the PowerEdge T610 system,

the labels are located on the front of the system.

March 2009

Updates

Windows Server

5.3 does not work with the Unified Server

2003 or Windows Server 2008