Dell PowerEdge R620 설치, 유지 관리 및 문제 해결 매뉴얼 - 페이지 32
{카테고리_이름} Dell PowerEdge R620에 대한 설치, 유지 관리 및 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R620 48 페이지. Poweredge series
Dell PowerEdge R620에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 시작하기 매뉴얼 (12 페이지), 설치 지침 (2 페이지), 설치 지침 (2 페이지), 포트폴리오 매뉴얼 (27 페이지), 시작하기 매뉴얼 (10 페이지)
페이지 인쇄
Chapter 2: Installation
Connecting the keyboard and mouse
Connect the keyboard and mouse to the USB ports.
Connecting the monitor
1. Connect the power cord from the monitor to the UPS or wall outlet.
2. Connect the VGA cable to the VGA connection at the rear of the system and connect the
opposite end to the VGA port on the Monitor.
Connecting to external interfaces
This section describes the external interfaces connected to the computer. This section includes
the following topics:
Connecting the switch link
●
Connecting to the customer network
●
Connecting the Customer Supplied SAS Tape Drive
●
Connecting the switch link
The CMS computer uses TCP/IP over a local area network (LAN) at only 10/100 Mbps for a
connection to the switch. One CMS computer can collect data from several switches. To the
CMS computer, each switch represents one ACD.
You must use ethernet port 1 for this connection.
For detailed information about how to connect and administer the switch link, see Avaya Call
Management System Switch Connections, Administration, and Troubleshooting.
32
Avaya CMS Dell R720 and R620 Computer Hardware Installation
on page 32.
on page 33.
on page 33.
October 2015