Dell C3422WE 매뉴얼 - 페이지 9

{카테고리_이름} Dell C3422WE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell C3422WE 21 페이지. Curved display manager
Dell C3422WE에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

Turn over the panel module to place screen faced

down for later assembling.

Take 1pcs LED board and 1pcs middle bezel with

speaker's cover unit, then put the middle bezel unit

into a fixture jip. Tear off the release paper on the

back of the LED board, and then paste the LED

board on the correct position of the middle bezel unit,

then paste 1pcs mylar tape to cover the LED board.

Move the middle bezel unit close to the panel

module unit, then assemble the middle bezel unit

with the front bezel and panel module.

4. Disassembly and Assembly Procedures

Tear off 3pcs gum on the back of the LED cable,

then paste the LED cable on the panel. Take 1pcs

S10

touch board, and tear off the release paper of the

middle bezel, and then paste the touch board on the

correct position of the middle bezel.

Use a Philips-head screwdriver to lock 20pcs screws

S11

for locking the middle bezel unit with the panel module.

(No.1~20 screw size=M3x4, Torque=5

Take 1pcs camera, 1pcs front cover of the camera,

1pcs rear cover of the camera,1pcs connective cable

and 2pcs rubbers. Connect the cable with the camera

board, then tear off the gum of the camera, and then

S12

paste the camera on th front cover, then paste 1pcs

foam on the cable. Assemble 2pcs rubbers with the

rear cover, then assemble the rear cover with the unit,

then locate the cable into the hook of the rear cover.

camera

front cover

0.5kgfxcm)

rear cover