EarthCore ISO'ven 설치, 작동, 유지보수 및 사용 설명서 - 페이지 7

{카테고리_이름} EarthCore ISO'ven에 대한 설치, 작동, 유지보수 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthCore ISO'ven 16 페이지. A personal size family wood fired oven

페이지 인쇄

Note: If the ISO'ven base is not required, client should

build a base approximately 40 inches high and a depth of

no less than 35" to set the table top ISO'ven on.

(Figure 6)

Step 9:

Cut a piece of Inswool to fit and lay against the back

wall of the Isokern back wall as shown, then place the back

wall inner liner against the Insboard.

Note: DO NOT MORTAR OVEN LINER OR INSWOOL

TO ISOKERN MATERIAL.

Step 10:

Place a row of brick on the Isokern material flush up

against the back wall inner liner. (Figure 8)

There is no need to mortar brick in place. Butt brick tightly

against each other and back wall liner.

Step 11:

Run a bead of high temperature caulking along the

outside edges of the back wall liner. Rest the side wall liner

against the back wall edge.

(Figure9)

Repeat on other side. Place Inswool up against outside of side

wall liners as shown.

Design Idea:

Optional base can be turned

to have open side in rear for

storage.

Assembly Instructions - Table Top

With Custom Base

Figure 6

With Optional Storage Base

Figure 7

Figure 8

40"

APPROX.

35"

MINIMUM

DEPTH

37"

MAX.

Trim Ledge to extend

no more than 9"

without additional

support from

underneath...

28"

Inswool

Oven Liner

Back Wall

See Brick

Layout

Caulk