EarthCore ISO'ven Installatie, bediening, onderhoud en gebruikershandleiding - Pagina 7

Blader online of download pdf Installatie, bediening, onderhoud en gebruikershandleiding voor {categorie_naam} EarthCore ISO'ven. EarthCore ISO'ven 16 pagina's. A personal size family wood fired oven

Pagina afdrukken
Note: If the ISO'ven base is not required, client should
build a base approximately 40 inches high and a depth of
no less than 35" to set the table top ISO'ven on.
(Figure 6)
Step 9:
Cut a piece of Inswool to fit and lay against the back
wall of the Isokern back wall as shown, then place the back
wall inner liner against the Insboard.
Note: DO NOT MORTAR OVEN LINER OR INSWOOL
TO ISOKERN MATERIAL.
Step 10:
Place a row of brick on the Isokern material flush up
against the back wall inner liner. (Figure 8)
There is no need to mortar brick in place. Butt brick tightly
against each other and back wall liner.
Step 11:
Run a bead of high temperature caulking along the
outside edges of the back wall liner. Rest the side wall liner
against the back wall edge.
(Figure9)
Repeat on other side. Place Inswool up against outside of side
wall liners as shown.
Design Idea:
Optional base can be turned
to have open side in rear for
storage.
Assembly Instructions - Table Top
With Custom Base
Figure 6
With Optional Storage Base
Figure 7
Figure 8
7
40"
APPROX.
35"
MINIMUM
DEPTH
37"
MAX.
Trim Ledge to extend
no more than 9"
without additional
support from
underneath...
28"
Inswool
Oven Liner
Back Wall
See Brick
Layout
Caulk