Dell E2222H 서비스 매뉴얼 - 페이지 9

{카테고리_이름} Dell E2222H에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E2222H 15 페이지. Teardown instruction
Dell E2222H에 대해서도 마찬가지입니다: 사용자 설명서 (49 페이지), 간소화된 서비스 매뉴얼 (12 페이지), 서비스 매뉴얼 (15 페이지), 지침 (3 페이지)

페이지 인쇄

Take out 1pcs panel assembled module with front

bezel and function key board from the carton, and

then examine the panel surface according to

inspection criteria. Turn over the panel, and then

place screen faced down for later assembling.

Move the bracket close to the panel, then use a

proper tool to connect LVDS cable to the connector

of the panel.

Adjust the bracket chassis to the correct position,

then use a Philips-head screwdriver to tighten 2pcs

screws for locking the bracket with panel module.

Use a Hex-head screwdriver to lock 2pcs screws for

locking the VGA connector.

(No.1~2 screw size=M3x4, Torque=5 0.5kgfxcm;

No.3~4 screw size=M3x8, Torque=6

5. Disassembly and Assembly Procedures

kgfxcm)

±0.5

Connect the panel lamp cable to the connector of

S10

the panel module, then fix the panel lamp cable with

1pcs aluminum foil as the picture below shown.

Connect the function key cable to the connector of

board, then tear off the 3pcs double-faced tape on

S11

the back of the back and fix the cable on the bracket

as the picture below shown.