Dell E228WFP 사용자 설명서 - 페이지 4

{카테고리_이름} Dell E228WFP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E228WFP 38 페이지. Flat panel monitor
Dell E228WFP에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 브로셔 및 사양 (3 페이지), 팩트 시트 (4 페이지), 사용자 설명서 (8 페이지)

페이지 인쇄
Dell E228WFP 사용자 설명서
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
use. This is referred to as 'Power Save Mode'*. If input from keyboard, mouse, or other input devices is detected by the computer, the monitor automatically
'wakes up'. The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Horizontal Sync Vertical Sync Video
Normal operation Active
Active-off mode
Inactive
Switch off
-
 
NOTE: The OSD only functions in the 'normal operation' mode. One of the following messages appears when the "menu" or "plus" buttons are pressed
when in Active-off mode.
 
1: Auto detect
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
Activate the computer and 'wake up' the monitor to gain access to the OSD.
This monitor is ENERGY STAR®-compliant as well as TCO '99 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

15-pin D-Sub connector
Pin Number Monitor Side of the 15-pin Side Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-test
6
GND-R
7
GND-G
8
GND-B
9
DDC +5V
10
GND-sync
11
GND
12
DDC data
13
H-sync
14
V-sync
15
DDC clock
24-pin Digital-Only DVI Connector
Power Indicator Power Consumption
Active
Active
Green
Inactive
Blanked Amber
-
-
Off
2: Analog Input
In Power Save Mode
or
Press computer power button
or any key on keyboard or move mouse
45 W (typical)
Less than 2 W
Less than 1 W
or
Press computer power button
or any key on keyboard or move mouse
3: Digital Input
In Power Save Mode