Allied Telesis SB251-10 릴리스 노트 - 페이지 2

{카테고리_이름} Allied Telesis SB251-10에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis SB251-10 14 페이지. Patch for switchblade 4000 series switches and at-9800 series switches

페이지 인쇄

Some of the issues addressed in this Release Note include a level number. This

number reflects the importance of the issue that has been resolved. The levels

are:

This issue will cause significant interruption to network services, and

Level 1

there is no work-around.

Level 2

This issue will cause interruption to network service, however there

is a work-around.

Level 3

This issue will seldom appear, and will cause minor inconvenience.

Level 4

This issue represents a cosmetic change and does not affect network

operation.

Features in SB251-10

Patch SB251-10 includes all issues resolved and enhancements released in

previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 03335

Module: SWI

Broadcast Storm rate limiting was not limiting broadcast packets when

these were set per-VLAN. This issue has been resolved.

PCR: 03399

Module: STP

Enabling STP debug on a SwitchBlade led to invalid port numbers being

displayed in the debug output. This issue has been resolved so that ports are

correctly displayed in the board.portnumber format.

PCR: 03428

Module: STP

Sometimes while in Rapid STP mode, a port changing its role from

Alternate to Designated or Root did not make a rapid transition to the

Forwarding state. This issue has been resolved.

PCR: 03608

Module: SWI, STP

The DISABLE SWITCH PORT and ENABLE SWITCH PORT commands

were not interacting correctly with trunk groups. This issue has been

resolved so that if a port in a trunk group is disabled with the DISABLE

SWITCH PORT command, the port will now be removed from its trunk

group in the hardware tables. Also, enabling a disabled trunk group port

now returns the port to its trunk group in the hardware tables.

PCR: 03612

Module: SWI, STP

Rapid STP was not interacting correctly with trunk groups. This issue has

been resolved.

Patch Release Note

Level: 2

Level: 4

Level: 2

Level: 3

Level: 2

Patch SB251-10 for Software Release 2.5.1

C613-10361-00 REV J