Allied Telesis SB251-10 Release Release - Pagina 2
Blader online of download pdf Release Release voor {categorie_naam} Allied Telesis SB251-10. Allied Telesis SB251-10 14 pagina's. Patch for switchblade 4000 series switches and at-9800 series switches
2
Some of the issues addressed in this Release Note include a level number. This
number reflects the importance of the issue that has been resolved. The levels
are:
This issue will cause significant interruption to network services, and
Level 1
there is no work-around.
Level 2
This issue will cause interruption to network service, however there
is a work-around.
Level 3
This issue will seldom appear, and will cause minor inconvenience.
Level 4
This issue represents a cosmetic change and does not affect network
operation.
Features in SB251-10
Patch SB251-10 includes all issues resolved and enhancements released in
previous patches for Software Release 2.5.1, and the following enhancements:
PCR: 03335
Module: SWI
Broadcast Storm rate limiting was not limiting broadcast packets when
these were set per-VLAN. This issue has been resolved.
PCR: 03399
Module: STP
Enabling STP debug on a SwitchBlade led to invalid port numbers being
displayed in the debug output. This issue has been resolved so that ports are
correctly displayed in the board.portnumber format.
PCR: 03428
Module: STP
Sometimes while in Rapid STP mode, a port changing its role from
Alternate to Designated or Root did not make a rapid transition to the
Forwarding state. This issue has been resolved.
PCR: 03608
Module: SWI, STP
The DISABLE SWITCH PORT and ENABLE SWITCH PORT commands
were not interacting correctly with trunk groups. This issue has been
resolved so that if a port in a trunk group is disabled with the DISABLE
SWITCH PORT command, the port will now be removed from its trunk
group in the hardware tables. Also, enabling a disabled trunk group port
now returns the port to its trunk group in the hardware tables.
PCR: 03612
Module: SWI, STP
Rapid STP was not interacting correctly with trunk groups. This issue has
been resolved.
Patch Release Note
Level: 2
Level: 4
Level: 2
Level: 3
Level: 2
Patch SB251-10 for Software Release 2.5.1
C613-10361-00 REV J