Dell EMC NX3240 문제 해결 매뉴얼 - 페이지 5
{카테고리_이름} Dell EMC NX3240에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC NX3240 12 페이지. Network attached storage system using windows storage server 2016
Dell EMC NX3240에 대해서도 마찬가지입니다: 시스템 설정 (2 페이지), 설정 (2 페이지)
페이지 인쇄
•
•
Error: -5003 occurred while creating an OS volume
Description
Invalid drive configuration.
Workaround
Perform one of the following tasks:
•
•
Error: -5004 occurred while creating an OS volume
Description
Encountered unexpected format or existing data on drives. Cannot proceed with reinstallation.
Workaround
Perform one of the following tasks:
•
•
Error: -5005 occurred while creating an OS volume
Description
Encountered unexpected format or existing data on drives. Cannot proceed with reinstallation.
Workaround
Enter the PERC BIOS mode during the OS boot operation and ensure that there are no foreign configurations, no
data on the drives, the drives meet the minimum size requirement, and are fully functioning and accessible.
For more information, see the PERC documentation at Dell.com/storagecontrollermanuals.
Error: -5006 Dell EMC Storage NAS OS Reinstall DVD
could not be located
Description
Ensure that your Dell EMC Storage NAS OS Reinstall DVD is loaded in the DVD drive.
Boot back into the Dell EMC Storage NAS OS Reinstall DVD to re-initiate the process.
For more information about connecting the card, see the Installation and Service Manual at Dell.com/
storagemanuals.
Enter the PERC BIOS during the OS boot operation and ensure that the internal drive controller is functional.
For more information, see the PERC documentation at Dell.com/storagecontrollermanuals.
Ensure that your system supports an internal drive controller.
For information about the internal drive controllers supported on your system, see the system hardware
documentation at Dell.com/storagemanuals.
Ensure that all hard drives in the OS drive slots are correctly attached and do not have data on them. Hard
drives for the OS must be of the same type and must have greater than 140 GB disk space.
Enter the PERC BIOS during the OS boot operation and ensure that there are no foreign configurations, no
data on the hard drives, the drives meet the minimum disk space (memory capacity) requirement, and are fully
functioning and accessible.
For more information, see the PERC documentation at Dell.com/storagecontrollermanuals.
Ensure that all hard drives in the OS hard drives slots are correctly attached and do not have data on them.
Hard drives for the OS must be of the same type and must meet the minimum disk space requirements.
Enter the PERC BIOS mode during the OS boot operation and ensure that there are no foreign configurations,
no data on the drives, the drives meet the minimum disk space requirement, and are fully functioning and
accessible.
For more information, see the PERC documentation at Dell.com/storagecontrollermanuals.
Installation Issues
5