Dell EMC NX3240 문제 해결 매뉴얼 - 페이지 6

{카테고리_이름} Dell EMC NX3240에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC NX3240 12 페이지. Network attached storage system using windows storage server 2016
Dell EMC NX3240에 대해서도 마찬가지입니다: 시스템 설정 (2 페이지), 설정 (2 페이지)

페이지 인쇄
Dell EMC NX3240 문제 해결 매뉴얼
Workaround
Perform one of the following tasks:
•
•

Error: -5007 occurred while creating an OS volume

Description
Encountered unexpected format or existing data on drives. Cannot proceed with reinstallation.
Workaround
Perform the following:
1
2
3
4
Error: -5008 Identity module is not installed on the
system
Description
The Identity Module is not installed on the system and cannot proceed with reinstallation.
Workaround
Install the Identity Module by using iDRAC and restart Dell EMC Storage NAS Reinstall.

Reinstallation error message remains on the LCD

Description
The last error message remains on the LCD until the OS is successfully reinstalled.
Workaround
Perform the following tasks:
1
2
3

Display log console displays incorrect date

Description
The display log console displays incorrect date during the OS reinstallation process.
Workaround
This is a known issue and does not affect the system.
6
Installation Issues
Ensure that the OS reinstallation media is loaded in the optical drive. If the media is available in the drive, the
drive may be faulty.
For information about troubleshooting the drive, see the Installation and Service Manual at Dell.com/
powervaultmanuals.
Ensure that the drive is still functional. Restart the Dell EMC Storage NAS system by using the OS reinstallation
media to restart the process.
Back up all data on virtual disk 0, if possible.
Restart your system and boot in to the PERC controller BIOS during Power On Self Test (POST).
For more information about booting into the PERC controller BIOS, see the PERC User's Guide at Dell.com/
storagecontrollermanuals.
Delete the virtual disk that has LUN ID as zero (0).
Restart the Dell EMC Storage NAS system by using the OS reinstallation media.
Change the user-defined string to the default option or User Defined String.
Enter the BIOS mode and select the Embedded Server Management screen.
Change the option to either default or type a new string.